Hydraulic cone crusher maintenance and use precautions

Hydraulic Cone Crusher is known for its widely used in metal mining, metallurgical industry, chemical industry, construction industry, cement industry and gravel industry. Then in the use and maintenance of hydraulic cone crusher should pay attention to what the problem is particularly important.

SMG Series Hydraulic Cone Crusher

Yifan mechanical engineers to share the use and maintenance of the process of hydraulic cone crusher should be noted that some of the issues:
(1) Hydraulic Cone Crusher Do not load starting, so as not to cause an accident.
(2) parking, you must first stop the feeder and ore crushing discharged into the crushing chamber, the hydraulic cone crusher parking.
(3) Hydraulic Cone Crusher should always check the locking system pressure and hydraulic station, identify problems and timely treatment.
(4) the maximum hydraulic cone crusher to the ore size ≤ 85% to the mine mouth size, otherwise it will lead to the reduction of the production of hydraulic cone crusher, hydraulic cone hydraulic cone crusher damage to some parts.
(5) the circular plate wear due to friction, the impact of changes in the gear backlash must be at the bottom, in order to ensure proper meshing of the gear cover additional gasket, the thickness of the gasket should be equal to the amount of wear of the circular plate.
(6) the replacement of rolling acetabular wall. U-shaped screw adjustment ring rolling acetabular wall between the injection of zinc alloy, so closely, new installation or replacement of rolling acetabular wall, after 6-8 hours of work, you should check their retention, and re-tighten the U-shaped screw.
(7) Hydraulic Cone Crusher wall replacement. Hydraulic Cone Crusher wall is fixed on the conical body with a tapered head between the two cast zinc alloy, new installation or new replacement cone crusher wall 6-8 hours of work should be checked after fastening found loose immediately fastening.
(8) Hydraulic Cone Crusher Hydraulic Cone ore must be allocated in the middle of the plate, in order to prevent hydraulic cone crusher overload, the liner wear unevenly; does not permit the ore directly into the crushing cavity. The right to mine: ore distribution plate uniformly dispersed in the crushing cavity, given into the ore can not be higher than the level of the rolling acetabular wall.
(9) In order to prevent the rotation of the bushing in the upper groove of the bushing into a zinc alloy, the preparation of the actual size of the frame body should be replaced with new bushings, because the hydraulic cone crusher will inevitably lead after a long period of work, loading and unloadingwith the change in the relationship. If the gap is too large, you will Bushing rupture.
(10) a conical bushing. Drogue empty eccentric shaft to be strict co-injection of zinc alloy to prevent the sleeve rotation, zinc alloy full gap, the drogue may cause deformation because of the thermal Note zinc alloy, better check the size of the new cone set and found not to correct should be promptly corrected, the actual size of the eccentric sleeve inner diameter of the manufacture of spare parts should be formulated to maintain the original tie.

Welcome to Yifan Machinery cone crusher website for the knowledge of the crusher.Here is our site editor free upload some of the information, if you want to learn more comprehensive the crusher product information and prices, you can give us a message in the comment box below. Every day we check for messages received your message back to you in the first time.Has received 1378, has completed Replies 1378, effective 1367.