Installation and maintenance of the cone crusher

Cone crusher installation :

The cone crusher confidential installed on a solid reinforced concrete foundation . Can also be installed on a steel structure on the rack . Determine the depth of the user based on local soil conditions and on-site environmental conditions .

Provide the base map is not a Civil Construction , users do construction based on the basis of size map design five crushing chamber to select the crushing cavity , there are four : A cavity is broken in the cavity B in crushing cavity C for crushing D cavity for special crushing . Users may need to select .

In order to avoid the accumulation of crushing chamber materials , cone crusher have enough space to install the transport equipment . The structure size the user can determine the supporting transport equipment .

The cone crusher maintenance :

The cone crusher in order to ensure the use of the environment is harsh , dust , combined with some use of unit maintenance is not in place , often a variety of problems in the operation , in general, the cone crusher should note the following problems in the operation , machine run.

cone crusher break at work , feeding should be uniform, not segregation . Feeding inequality appears to reduce production capacity , product size is too large , frequent spring action , the bowl bearing pressure , rising power .

(1)Have a device in addition to iron , to prevent the crushing chamber is too iron , if frequent iron , it may be caused by a broken shaft accident .

(2)Install the drive belt can not be too tight , otherwise it would cause the drive shaft rotation is not flexible or fracture ; can not be too loose , otherwise it would cause the crusher stuffy car .

(3)The feed can not be too wet too sticky, the fine can not be too , and can not be too much , otherwise it would cause a stuffy car .

(4)Crusher discharge opening plot mine will cause nausea car .

(5)To full production , there would be the product granularity is too coarse .

(6)The spring pressure is not too tight, the pressure is too large will be broken shaft accident occurs , the pressure is too frequently beating a small spring , affecting the normal work of the crusher , and the product particle size coarsening .

(7)The oil temperature can not be too high or too low, otherwise it will affect the machine is running .

(8)Lubricating oil to be changed frequently , not dirty , dirty will speed up the gear and bowl-shaped tile , bushings and other wear and tear , even the sleeve research death .

(9)Broken in the production line than the allocation should be reasonable, so as to maximize the efficiency of the crusher .

The cone crusher ( cone crusher ) in the actual operation of the process of using one kind or another , as the case does not have to adopt different solutions , some cases presented here are often seen in actual operation .

Thank you for your interest in YiFan. Please use any of the methods below to get in touch with us.
Add: The Middle of Zhengyuan Road, Xingyang Eastern Development Zone.
zip:450100
E-mail：yifanseo@yfmac.com
MSN On line: yifancrusher@yahoo.cn
ICQ: 639607958 QQ: 2502761202
Tel:  +86-371-64966831  Fax: +86-371-64628872
The article by Cone Crusher,Cone Crushers Yifan Machinery Editor: http://www.conecrusher.org/, please indicate the source , little effort , thank you .

Welcome to Yifan Machinery cone crusher website for the knowledge of the crusher.Here is our site editor free upload some of the information, if you want to learn more comprehensive the crusher product information and prices, you can give us a message in the comment box below. Every day we check for messages received your message back to you in the first time.Has received 1378, has completed Replies 1378, effective 1367.